From c9d1ae72407613fbc663b9215819f956dafc4921 Mon Sep 17 00:00:00 2001 From: tnut Date: Thu, 4 Nov 2010 13:52:24 +0100 Subject: gdm, port nettoyé MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- extra/gdm/NuTyXlogo.png | Bin 37075 -> 0 bytes extra/gdm/Pkgfile | 6 +- extra/gdm/defaults.conf | 746 ------------------------------------------------ 3 files changed, 3 insertions(+), 749 deletions(-) delete mode 100755 extra/gdm/NuTyXlogo.png delete mode 100644 extra/gdm/defaults.conf diff --git a/extra/gdm/NuTyXlogo.png b/extra/gdm/NuTyXlogo.png deleted file mode 100755 index 23883fdbd..000000000 Binary files a/extra/gdm/NuTyXlogo.png and /dev/null differ diff --git a/extra/gdm/Pkgfile b/extra/gdm/Pkgfile index c5049e3d3..efbc105e8 100755 --- a/extra/gdm/Pkgfile +++ b/extra/gdm/Pkgfile @@ -7,9 +7,9 @@ name=gdm version=2.20.11 release=2 -source=(http://ftp.gnome.org/pub/gnome/sources/$name/2.20/$name-$version.tar.bz2 \ - http://nutyx.meticul.eu/files/nutyx-attapu-gdm-2.tar.bz2 \ - defaults.conf NuTyXlogo.png) +source=(http://ftp.gnome.org/pub/gnome/sources/$name/${version%.*}/$name-$version.tar.bz2 \ + http://nutyx.meticul.eu/files/patchs/$name/nutyx-attapu-gdm-2.tar.bz2 \ + http://nutyx.meticul.eu/files/patchs/$name/{NuTyXlogo.png,defaults.conf}) build() { cd $name-$version diff --git a/extra/gdm/defaults.conf b/extra/gdm/defaults.conf deleted file mode 100644 index 2c9f3613d..000000000 --- a/extra/gdm/defaults.conf +++ /dev/null @@ -1,746 +0,0 @@ -# GDM System Defaults Configuration file. -# -# This file should not be updated by hand. Since GDM 2.13.0.4, configuration -# choices in the GDM Custom Configuration file will override the default -# values specified in this file. This GDM System Defaults Configuration file -# may be overwritten on upgrade, so to ensure that your configuration choices -# are not lost, please make sure that your changes are made only the GDM Custom -# Configuration file. The GDM Custom Configuration file is found at the -# following location: -# -# /etc/gdm/custom.conf -# -# If you were using an older version of GDM, your system may have the the older -# gdm.conf configuration file on the system. If so, then this file is used -# instead of the GDM Custom Configuration file for backwards support. If you -# make changes to the GDM Custom Configuration file and they seem to not be -# taking effect, this is likely the problem. Consider migrating your -# configuration to the new configuration file and removing the gdm.conf file. -# -# You can use the gdmsetup program to graphically edit the gdm.conf-custom -# file. Note that gdmsetup does not support every option in this file, just -# the most common ones that users want to change. If you feel that gdmsetup -# should support additional configuration options, please file a bug report at -# http://bugzilla.gnome.org/. -# -# If you hand-edit the GDM configuration, you should run the following command -# to get the GDM daemon to recognize the change. Any running GDM GUI programs -# will also be notified to update with the new configuration. -# -# gdmflexiserver --command="UPDATE_CONFIG " -# -# e.g, the "Enable" key in the "[debug]" section would be "debug/Enable". -# -# You can also run gdm-restart or gdm-safe-restart to cause GDM to restart and -# re-read the new configuration settings. You can also restart GDM by sending -# a HUP or USR1 signal to the daemon. HUP behaves like gdm-restart and causes -# any user session started by GDM to exit immediately while USR1 behaves like -# gdm-safe-restart and will wait until all users log out before restarting GDM. -# -# For full reference documentation see the GNOME help browser under -# GNOME|System category. You can also find the docs in HTML form on -# http://www.gnome.org/projects/gdm/ -# -# NOTE: Some values are commented out, but show their default values. Lines -# that begin with "#" are considered comments. -# -# Have fun! - -[daemon] -# Automatic login, if true the first attached screen will automatically logged -# in as user as set with AutomaticLogin key. -AutomaticLoginEnable=false -AutomaticLogin= - -# Timed login, useful for kiosks. Log in a certain user after a certain amount -# of time. -TimedLoginEnable=false -TimedLogin= -TimedLoginDelay=30 - -# The GDM configuration program that is run from the login screen, you should -# probably leave this alone. -#Configurator=/usr/sbin/gdmsetup --disable-sound --disable-crash-dialog - -# The chooser program. Must output the chosen host on stdout, probably you -# should leave this alone. -#Chooser=/usr/lib/gdmchooser - -# The greeter for attached (non-xdmcp) logins. Change gdmlogin to gdmgreeter -# to get the new graphical greeter. -Greeter=/usr/lib/gdmgreeter - -# The greeter for xdmcp logins, usually you want a less graphically intensive -# greeter here so it's better to leave this with gdmlogin -#RemoteGreeter=/usr/lib/gdmlogin - -# Launch the greeter with an additional list of colon separated GTK+ modules. -# This is useful for enabling additional feature support e.g. GNOME -# accessibility framework. Only "trusted" modules should be allowed to minimize -# security holes -#AddGtkModules=false -# By default, these are the accessibility modules. -#GtkModulesList=gail:atk-bridge:/usr/lib/gtk-2.0/modules/libdwellmouselistener:/usr/lib/gtk-2.0/modules/libkeymouselistener - -# Default path to set. The profile scripts will likely override this value. -# This value will be overridden with the value from /etc/default/login if it -# contains "ROOT=". -#DefaultPath=/bin:/usr/bin -# Default path for root. The profile scripts will likely override this value. -# This value will be overridden with the value from /etc/default/login if it -# contains "SUROOT=". -#RootPath=/sbin:/usr/sbin:/bin:/usr/bin - -# If you are having trouble with using a single server for a long time and want -# GDM to kill/restart the server, turn this on. On Solaris, this value is -# always true and this configuration setting is ignored. -#AlwaysRestartServer= - -# User and group used for running GDM GUI applications. By default this is set -# to user "gdm" and group "gdm". This user/group should have very limited -# permissions and access to only the gdm directories and files. -User=gdm -Group=gdm - -# To try to kill all clients started at greeter time or in the Init script. -# does not always work, only if those clients have a window of their own. -#KillInitClients=true -LogDir=/var/log/gdm - -# Note that a post login script is run before a PreSession script. It is run -# after the login is successful and before any setup is run on behalf of the -# user. -PostLoginScriptDir=/etc/gdm/PostLogin/ -PreSessionScriptDir=/etc/gdm/PreSession/ -PostSessionScriptDir=/etc/gdm/PostSession/ -DisplayInitDir=/etc/gdm/Init -# Distributions: If you have some script that runs an X server in say VGA -# mode, allowing a login, could you please send it to me? -#FailsafeXServer= -# if X keeps crashing on us we run this script. The default one does a bunch -# of cool stuff to figure out what to tell the user and such and can run an X -# configuration program. -XKeepsCrashing=/etc/gdm/XKeepsCrashing - -# System command support. -# -# Reboot, Halt and suspend commands, you can add different commands separated -# by a semicolon. GDM will use the first one it can find. -RebootCommand=/usr/bin/reboot;/sbin/reboot;/sbin/shutdown -r now;/usr/sbin/shutdown -r now -HaltCommand=/usr/bin/poweroff;/sbin/poweroff;/sbin/shutdown -h now;/usr/sbin/shutdown -h now -SuspendCommand= - -# The following options specify how GDM system commands are supported. -# -# Specify which actions are displayed in the greeter. Valid values are HALT, -# REBOOT, SUSPEND, and CUSTOM_CMD separated by semicolons. -SystemCommandsInMenu=HALT;REBOOT;SUSPEND;CUSTOM_CMD - -# Specify which actions are supported by QUERY_LOGOUT_ACTION, SET_LOGOUT_ACTION -# and SET_SAFE_LOGOUT_ACTION. Valid values are HALT, REBOOT, SUSPEND, and -# CUSTOM_CMD separated by semicolons. -AllowLogoutActions=HALT;REBOOT;SUSPEND;CUSTOM_CMD - -# This feature is only functional if GDM is compiled with RBAC (Role Based -# Access Control) support. -# Specify the RBAC key used to determine if the user has permission to use -# the action via QUERY_LOGOUT_ACTION, SET_LOGOUT_ACTION and -# SET_SAFE_LOGOUT_ACTION. The GDM GUI will only display the action if the -# "gdm" user has RBAC permissions to use the action. RBAC keys for multiple -# actions can be specified by separating them by semicolons. The format for -# each is "Action:RBAC key". If an action is not specified, it is assumed -# all users have permission for this action. For example: -# HALT:key.for.halt,REBOOT:key.for.reboot,[...] -RBACSystemCommandKeys= - -# Probably should not touch the below this is the standard setup. -ServAuthDir=/var/lib/gdm -# This is our standard startup script. A bit different from a normal X -# session, but it shares a lot of stuff with that. See the provided default -# for more information. -BaseXsession=/etc/gdm/Xsession -# This is a directory where .desktop files describing the sessions live. It is -# really a PATH style variable since 2.4.4.2 to allow actual interoperability -# with KDM. Note that /Sessions is there for backwards -# compatibility reasons with 2.4.4.x. -#SessionDesktopDir=/etc/X11/sessions/:/etc/X11/dm/Sessions/:/usr/share/gdm/BuiltInSessions/:/usr/share/xsessions/ -# This is the default .desktop session. One of the ones in SessionDesktopDir -#DefaultSession=gnome.desktop -# Better leave this blank and HOME will be used. You can use syntax ~/ below -# to indicate home directory of the user. You can also set this to something -# like /tmp if you don't want the authorizations to be in home directories. -# This is useful if you have NFS mounted home directories. Note that if this -# is the home directory the UserAuthFBDir will still be used in case the home -# directory is NFS, see security/NeverPlaceCookiesOnNFS to override this -# behavior. -UserAuthDir= -# Fallback directory for writing authorization file if user's home directory -# is not writable. -UserAuthFBDir=/tmp -UserAuthFile=.Xauthority -# The X server to use if we can't figure out what else to run. -StandardXServer=/usr/bin/X -# The maximum number of flexible X servers to run. -#FlexibleXServers=5 -# And after how many minutes should we reap the flexible server if there is no -# activity and no one logged on. Set to 0 to turn off the reaping. Does not -# affect nested flexiservers. -#FlexiReapDelayMinutes=5 - -# The X nest command. -# Examples of valid commands (assuming installed to /usr/X11/bin: -# Xorg Xnest: /usr/X11/bin/Xnest -audit 0 -name Xnest -# Xsun Xnest: /usr/openwin/bin/Xnest -audit 0 -name Xnest -pn -# Xephyr: /usr/X11/bin/Xephyr -audit 0 -Xnest=/usr/bin/Xnest -audit 0 -name Xnest -# Xsun Xnest does not support font paths (passed into Xnest -fp argument) -# that include the ":unscaled" suffix after a path name. Setting this to -# false will strip any ":unscaled" suffix from the font path. If not -# using this Xnest, the value should be true. -XnestUnscaledFontPath=true - -# Automatic VT allocation. Right now only works on Linux. This way we force -# X to use specific vts. Turn VTAllocation to false if this is causing -# problems. -#FirstVT=7 -#VTAllocation=true -# Should double login be treated with a warning (and possibility to change VT's -# on Linux and FreeBSD systems for console logins) -#DoubleLoginWarning=true -# Should a second login always resume the current session and switch VT's on -# Linux and FreeBSD systems for console logins -#AlwaysLoginCurrentSession=true - -# If true then the last login information is printed to the user before being -# prompted for password. While this gives away some info on what users are on -# a system, it on the other hand should give the user an idea of when they -# logged in and if it doesn't seem kosher to them, they can just abort the -# login and contact the sysadmin (avoids running malicious startup scripts). -#DisplayLastLogin=false - -# Program used to play sounds. Should not require any 'daemon' or anything -# like that as it will be run when no one is logged in yet. -#SoundProgram=/usr/bin/play - -# These are the languages that the console cannot handle because of font -# issues. Here we mean the text console, not X. This is only used when there -# are errors to report and we cannot start X. -# This is the default: -#ConsoleCannotHandle=am,ar,az,bn,el,fa,gu,hi,ja,ko,ml,mr,pa,ta,zh - -# This determines whether GDM will honor requests DYNAMIC requests from the -# gdmdynamic command. -#DynamicXServers=false - -# This determines whether GDM will send notifications to the console. -#ConsoleNotify=true - -# How long gdm should wait before it assumes a started Xserver is defunct and -# kills it. 10 seconds should be long enough for X, but Xgl may need 20 or 25. -GdmXserverTimeout=10 - -[security] -# Allow root to login. It makes sense to turn this off for kiosk use, when -# you want to minimize the possibility of break in. -AllowRoot=true -# Allow login as root via XDMCP. This value will be overridden and set to -# false if the /etc/default/login file exists and contains -# "CONSOLE=/dev/login", and set to true if the /etc/default/login file exists -# and contains any other value or no value for CONSOLE. -AllowRemoteRoot=false -# This will allow remote timed login. -AllowRemoteAutoLogin=false -# 0 is the most restrictive, 1 allows group write permissions, 2 allows all -# write permissions. -RelaxPermissions=0 -# Check if directories are owned by logon user. Set to false, if you have, for -# example, home directories owned by some other user. -CheckDirOwner=true -# If your HOME is managed by automounter, set to true -SupportAutomount=false -# Number of seconds to wait after a failed login -#RetryDelay=1 -# Maximum size of a file we wish to read. This makes it hard for a user to DoS -# us by using a large file. -#UserMaxFile=65536 -# If true this will basically append -nolisten tcp to every X command line, a -# good default to have (why is this a "negative" setting? because if it is -# false, you could still not allow it by setting command line of any particular -# server). It's probably better to ship with this on since most users will not -# need this and it's more of a security risk then anything else. -# Note: Anytime we find a -query or -indirect on the command line we do not add -# a "-nolisten tcp", as then the query just wouldn't work, so this setting only -# affects truly attached sessions. -#DisallowTCP=true -# By default never place cookies if we "detect" NFS. We detect NFS by -# detecting "root-squashing". It seems bad practice to place cookies on things -# that go over the network by default and thus we do not do it by default. -# Sometimes you can however use safe remote filesystems where this is OK and -# you may want to have the cookie in your home directory. -#NeverPlaceCookiesOnNFS=true -# Will cause PAM_DISALLOW_NULL_AUTHTOK to be passed as a flag to -# pam_authenticate and pam_acct_mgmt, disallowing NULL password. This setting -# will only take effect if PAM is being used by GDM. This value will be -# overridden with the value from /etc/default/login if it contains -# "PASSREQ=[YES|NO]" -#PasswordRequired=false -# Specifies the PAM Stack to use, "gdm" by default. -PamStack=gdm -# GDM allows configuration of how ut_line is set when it does utmp/wtmp and -# audit processing. If VT is being used, then ut_line will be set to the -# device associated with the VT. If the console is attached and has a device -# name specified in the [servers] section, then this value will be used. -# Otherwise the value is defaulted to the value specified in UtmpLineAttached -# for attached displays and UtmpLineRemote for remote displays. The value -# can be left empty which means that ut_line will be set to an empty value -# (if not VT and no value specified in the [servers] section. The values -# can contain "%d" which is translated to the DISPLAY value or %h which -# is translated to the hostname. The values for both keys must begin with -# "/dev/". -UtmpLineAttached=/dev/console -UtmpLineRemote= -# If true and the specified UtmpLineAttached or UtmpLineRemote does not exist, -# then create a pseudo-device filename that will be touched when the utmp -# record is updated. Creating such a psuedo-device ensures that programs -# that stat the utmp device associated with ut_line such as finger, last, -# etc. work in a reasonable way. -UtmpPseudoDevice=false - -# XDMCP is the protocol that allows remote login. If you want to log into GDM -# remotely (I'd never turn this on on open network, use ssh for such remote -# usage). You can then run X with -query to log in, or -# -indirect to run a chooser. Look for the 'Terminal' server type -# at the bottom of this config file. -[xdmcp] -# Distributions: Ship with this off. It is never a safe thing to leave out on -# the net. Setting up /etc/hosts.allow and /etc/hosts.deny to only allow local -# access is another alternative but not the safest. Firewalling port 177 is -# the safest if you wish to have xdmcp on. Read the manual for more notes on -# the security of XDMCP. -Enable=false -# Honor indirect queries, we run a chooser for these, and then redirect the -# user to the chosen host. Otherwise we just log the user in locally. -#HonorIndirect=true -# Maximum pending requests. -#MaxPending=4 -#MaxPendingIndirect=4 -# Maximum open XDMCP sessions at any point in time. -#MaxSessions=16 -# Maximum wait times. -#MaxWait=15 -#MaxWaitIndirect=15 -# How many times can a person log in from a single host. Usually better to -# keep low to fend off DoS attacks by running many logins from a single host. -# This is now set at 2 since if the server crashes then GDM doesn't know for -# some time and wouldn't allow another session. -#DisplaysPerHost=2 -# The number of seconds after which a non-responsive session is logged off. -# Better keep this low. -#PingIntervalSeconds=15 -# The port. 177 is the standard port so better keep it that way. -#Port=177 -# Willing script, none is shipped and by default we'll send hostname system id. -# But if you supply something here, the output of this script will be sent as -# status of this host so that the chooser can display it. You could for -# example send load, or mail details for some user, or some such. -#Willing=/etc/gdm/Xwilling - -[gui] -# The specific gtkrc file we use. It should be the full path to the gtkrc that -# we need. Unless you need a specific gtkrc that doesn't correspond to a -# specific theme, then just use the GtkTheme key. -#GtkRC=/usr/share/themes/Default/gtk-2.0/gtkrc - -# The GTK+ theme to use for the GUI. -#GtkTheme=Default -# If to allow changing the GTK+ (widget) theme from the greeter. Currently -# this only affects the standard greeter as the graphical greeter does not yet -# have this ability. -#AllowGtkThemeChange=true -# Comma separated list of themes to allow. These must be the names of the -# themes installed in the standard locations for gtk themes. You can also -# specify 'all' to allow all installed themes. These should be just the -# basenames of the themes such as 'Thinice' or 'LowContrast'. -#GtkThemesToAllow=all - -# Maximum size of an icon, larger icons are scaled down. -#MaxIconWidth=128 -#MaxIconHeight=128 - -[greeter] -# The following options for setting titlebar and setting window position are -# only useful for the standard login (gdmlogin) and are not used by the -# themed login (gdmgreeter). -# -# The standard login has a title bar that the user can move. -#TitleBar=true -# Don't allow user to move the standard login window. Only makes sense if -# TitleBar is on. -#LockPosition=false -# Set a position for the standard login window rather then just centering the -# window. If you enter negative values for the position it is taken as an -# offset from the right or bottom edge. -#SetPosition=false -#PositionX=0 -#PositionY=0 - -# Enable the Face browser. Note that the Browser key is only used by the -# standard login (gdmlogin) program. The Face Browser is enabled in -# the Graphical greeter by selecting a theme that includes the Face -# Browser, such as happygnome-list. The other configuration values that -# affect the Face Browser (MinimalUID, DefaultFace, Include, Exclude, -# IncludeAll, GlobalFaceDir) are used by both the Standard and Themed -# greeter. -Browser=true -# The default picture in the browser. -#DefaultFace=/usr/share/pixmaps/nobody.png -# User ID's less than the MinimalUID value will not be included in the face -# browser or in the gdmselection list for Automatic/Timed login. They will not -# be displayed regardless of the settings for Include and Exclude. -#MinimalUID=100 -# Users listed in Include will be included in the face browser and in the -# gdmsetup selection list for Automatic/Timed login. Users should be separated -# by commas. -#Include= -# Users listed in Exclude are excluded from the face browser and from the -# gdmsetup selection list for Automatic/Timed login. Excluded users will still -# be able to log in, but will have to type their username. Users should be -# separated by commas. -#Exclude=bin,daemon,adm,lp,sync,shutdown,halt,mail,news,uucp,operator,nobody,gdm,postgres,pvm,rpm,nfsnobody,pcap -# By default, an empty include list means display no users. By setting -# IncludeAll to true, the password file will be scanned and all users will be -# displayed except users excluded via the Exclude setting and user ID's less -# than MinimalUID. Scanning the password file can be slow on systems with -# large numbers of users and this feature should not be used in such -# environments. The setting of IncludeAll does nothing if Include is set to a -# non-empty value. -#IncludeAll=false -# If user or user.png exists in this dir it will be used as his picture. -#GlobalFaceDir=/usr/share/pixmaps/faces/ - -# File which contains the locale we show to the user. Likely you want to use -# the one shipped with GDM and edit it. It is not a standard locale.alias -# file, although GDM will be able to read a standard locale.alias file as well. -#LocaleFile=/etc/gdm/locale.alias -# Logo shown in the standard greeter. -#Logo=/usr/share/pixmaps/gdm-foot-logo.png -# Logo shown on file chooser button in gdmsetup (do not modify this value). -#ChooserButtonLogo=/usr/share/pixmaps/gdm-foot-logo.png -# The standard greeter should shake if a user entered the wrong username or -# password. Kind of cool looking -#Quiver=true - -# The Actions menu (formerly system menu) is shown in the greeter, this is the -# menu that contains reboot, shutdown, suspend, config and chooser. None of -# these is available if this is off. They can be turned off individually -# however. -#SystemMenu=true -# Configuration is available from the system menu of the greeter. -#ConfigAvailable=true -# Should the chooser button be shown. If this is shown, GDM can drop into -# chooser mode which will run the xdmcp chooser locally and allow the user to -# connect to some remote host. Local XDMCP does not need to be enabled, -# however. -#ChooserButton=true - -# Welcome is for all console logins and RemoteWelcome is for remote logins -# (through XDMCP). -# DefaultWelcome and DefaultRemoteWelcome set the string for Welcome to -# "Welcome" and for DefaultWelcome to "Welcome to %n", and properly translate -# the message to the appropriate language. Note that %n gets translated to the -# hostname of the machine. These default values can be overridden by setting -# DefaultWelcome and/or DefaultRemoteWelcome to false, and setting the Welcome -# and DefaultWelcome values as desired. Just make sure the strings are in -# utf-8 Note to distributors, if you wish to have a different Welcome string -# and wish to have this translated you can have entries such as -# "Welcome[cs]=Vitejte na %n". -DefaultWelcome=false -DefaultRemoteWelcome=true -Welcome=Bienvenue -RemoteWelcome=Bienvenue sur %n - -# Xinerama screen we use to display the greeter on. Not for true multihead, -# currently only works for Xinerama. -#XineramaScreen=0 -# Background settings for the standard greeter: -# Type can be 0=None, 1=Image & Color, 2=Color, 3=Image -#BackgroundType=2 -#BackgroundImage= -#BackgroundScaleToFit=true -# The Standard greeter (gdmlogin) uses BackgroundColor as the background -# color, while the themed greeter (gdmgreeter) uses GraphicalThemedColor -# as the background color. -BackgroundColor=#76848F -GraphicalThemedColor=#76848F -BackgroundType=1 -# XDMCP session should only get a color, this is the sanest setting since you -# don't want to take up too much bandwidth -#BackgroundRemoteOnlyColor=true - -# Program to run to draw the background in the standard greeter. Perhaps -# something like an xscreensaver hack or some such. -#BackgroundProgram= -# If this is true then the background program is run always, otherwise it is -# only run when the BackgroundType is 0 (None). -#RunBackgroundProgramAlways=false -# Delay before starting background program -#BackgroundProgramInitialDelay=30 -# Should the background program be restarted if it is exited. -#RestartBackgroundProgram=true -# Delay before restarting background program -#BackgroundProgramRestartDelay=30 - -# Show the Failsafe sessions. These are much MUCH nicer (focus for xterm for -# example) and more failsafe then those supplied by scripts so distros should -# use this rather then just running an xterm from a script. -#ShowGnomeFailsafeSession=true -#ShowXtermFailsafeSession=true -# Normally there is a session type called 'Last' that is shown which refers to -# the last session the user used. If off, we will be in 'switchdesk' mode -# where the session saving stuff is disabled in GDM -#ShowLastSession=true -# Always use 24 hour clock no matter what the locale. -#Use24Clock=auto -# Do not show any visible feedback in the password field. This is standard for -# instance in console, xdm and ssh. -#UseInvisibleInEntry=false - -# These two keys are for the themed greeter (gdmgreeter). Circles is the -# standard shipped theme. If you want GDM to select a random theme from a -# list then provide a list that is delimited by /: to the GraphicalThemes -# key and set GraphicalThemeRand to true. Otherwise use GraphicalTheme -# and specify just one theme. -GraphicalTheme=nutyx-attapu -#GraphicalThemes=circles/:happygnome -GraphicalThemeDir=/usr/share/gdm/themes/ -GraphicalThemeRand=false - -# If InfoMsgFile points to a file, the greeter will display the contents of the -# file in a modal dialog box before the user is allowed to log in. -#InfoMsgFile= -# If InfoMsgFile is present then InfoMsgFont can be used to specify the font to -# be used when displaying the contents of the file. -#InfoMsgFont=Sans 24 - -# If SoundOnLogin is true, then the greeter will beep when login is ready for -# user input. If SoundOnLogin is a file and the greeter finds the 'play' -# executable (see daemon/SoundProgram) it will play that file instead of just -# beeping. -#SoundOnLogin=true -#SoundOnLoginFile= -# If SoundOnLoginSuccess, then the greeter will play a sound (as above) when a -# user successfully logs in. -#SoundOnLoginSuccess=false -#SoundOnLoginSuccessFile= -# If SoundOnLoginFailure, then the greeter will play a sound (as above) when a -# user fails to log in. -#SoundOnLoginFailure=false -#SoundOnLoginFailureFile= - -# Specifies a program to be called by the greeter/login program when the -# initial screen is displayed. The purpose is to provide a hook where files -# used after login can be preloaded to speed performance for the user. The -# program will only be called once only, the first time a greeter is displayed. -# The gdmprefetch command may be used. This utility will load any libraries -# passed in on the command line, or if the argument starts with a "@" -# character, it will process the file assuming it is an ASCII file containing a -# list of libraries, one per line, and load each library in the file. -PreFetchProgram= - -# The chooser is what's displayed when a user wants an indirect XDMCP session, -# or selects Run XDMCP chooser from the system menu -[chooser] -# Default image for hosts. -#DefaultHostImg=/usr/share/pixmaps/nohost.png -# Directory with host images, they are named by the hosts: host or host.png. -HostImageDir=/usr/share/hosts/ -# Time we scan for hosts (well only the time we tell the user we are scanning -# actually, we continue to listen even after this has expired). -#ScanTime=4 -# A comma separated lists of hosts to automatically add (if they answer to a -# query of course). You can use this to reach hosts that broadcast cannot -# reach. -Hosts= -# Broadcast a query to get all hosts on the current network that answer. -Broadcast=true -# Set it to true if you want to send a multicast query to hosts. -Multicast=false -# It is an IPv6 multicast address.It is hardcoded here and will be replaced -# when officially registered xdmcp multicast address of TBD will be available. -#Multicast_Addr=ff02::1 -# Allow adding random hosts to the list by typing in their names. -#AllowAdd=true - -[debug] -# This will cause GDM to send debugging information to the system log, which -# will create a LOT of output. It is not recommended to turn this on for -# normal use, but it can be useful to determine the cause when GDM is not -# working properly. -Enable=false -# This will enable debug messages for accessibilty gesture listeners into the -# syslog. This includes output about key events, mouse button events, and -# pointer motion events. This is useful for figuring out the cause of why the -# gesture listeners may not be working, but is too verbose for general debug. -Gestures=false - -# Attached DISPLAY Configuration -# -[servers] -# This section defines which attached DISPLAYS should be started by GDM by -# default. You can add as many DISPLAYS as desired and they will always be -# started. The key for each entry must be a unique number that cooresponds to -# the DISPLAY number to start the X server. For a typical single-display -# machine, there will only be one entry "0" for DISPLAY ":0". The first word -# in the value corresponds to an X server definition in the "X Server -# Definitions" section of the configuration file. For example, the entry: -# -# 0=Standard -# -# Means that DISPLAY ":0" will start an X server as defined in the -# [server-Standard] section. -# -# The optional device argument is used to specify the device that is associated -# with the DISPLAY. When using Virtual Terminals (VT), this value is ignored -# and GDM will use the correct device name associated with the VT. If not -# using VT, then GDM will use the value specified by this optional argument. -# If the device argument is not defined, then GDM will use the default setting -# for attached displays defined in the UtmpLineAttached configuration option. -# For the main display (typically DISPLAY ":0"), "/dev/console" is a reasonable -# value. For other displays it is probably best to not include this argument -# unless you know the specific device associated with the DISPLAY. The device -# value can contain "%d" which is translated to the DISPLAY value or %h which -# is translated to the hostname. -# -0=Standard device=/dev/console - -# Example of how to set up DISPLAY :1 to also use Standard. -#1=Standard - -# If you wish to run the XDMCP chooser on the local display use the following -# line -#0=Chooser - -# X Server Definitions -# -# Note: Is your X server not listening to TCP requests? Refer to the -# security/DisallowTCP setting! - -[server-Standard] -name=Standard server -command=/usr/bin/X -audit 0 +extension XEVIE -flexible=true -# Indicates that the X server should be started at a different process -# priority. Values can be any integer value accepted by the setpriority C -# library function (normally between -20 and 20) with 0 being the default. For -# highly interactive applications, -5 yields good responsiveness. The default -# value is 0 and the setpriority function is not called if the value is 0. - -#priority=0 - -# To use this server type you should add -query host or -indirect host to the -# command line. -[server-Terminal] -name=Terminal server -# Add -terminate to make things behave more nicely -command=/usr/bin/X -audit 0 -terminate -# Make this not appear in the flexible servers (we need extra params anyway, -# and terminate would be bad for xdmcp choosing). You can make a terminal -# server flexible, but not with an indirect query. If you need flexible -# indirect query server, then you must get rid of the -terminate and the only -# way to kill the flexible server will then be by Ctrl-Alt-Backspace. -flexible=false -# Do not handle this X server for attached displays. -handled=false - -# To use this server type you should add -query host or -indirect host to the -# command line. -[server-Chooser] -name=Chooser server -command=/usr/bin/X -audit 0 -# Make this not appear in the flexible servers for now, but if you wish to -# allow a chooser server then make this true. This is the only way to make a -# flexible chooser server that behaves nicely. -flexible=false -# Run the chooser instead of the greeter. When the user chooses a machine they -# will get this same server but run with "-terminate -query hostname". -chooser=true - -[customcommand] -# This section allows you specify up to 10 custom commands. Each of the -# commands can be defined by the seven parameters listed below. In each of the -# descriptions of the parameters N can take on any values between 0 and 9, -# i.e. CustomCommand0=,CustomCommand1=,...,CustomCommand9=. The numbers -# can have gaps as long as they fit within predefined set of 10, and their -# placement order within this section and with respect to each other is -# not important. -# -# CustomCommandN, CustomCommandTextN, CustomCommandLabelN, -# CustomCommandLRLabelN, CustomCommandTooltipN, CustomCommandIsPersistentN -# and CustomCommandNoRestartN should all be defined for a given integer N, -# where N can be a number from 0-9 (if not the default values will be -# assigned except CustomCommandN for which no default exists). - -# Custom command to run. Multiple commands may be specified separated by -# semicolons. GDM will use the first valid command. Examples: -# /sbin/bootwindoze;/usr/bin/bootwindoze, or -# /sbin/runupdate;/usr/local/sbin/runupdate -# -#CustomCommandN= - -# Custom command dialog message that will appear on all warning dialogs. -# This will vary depending on what you want to do. Examples: -# Are you sure you want to restart system into Windoze?, or -# Are you sure you want do do this? -#CustomCommandTextN= - -# Custom command label that will appear as stock label on buttons/menu items. -# This option can't contain any semicolon characters (i.e. ";"). -# Examples: -# _Windoze, or -# _Update Me -#CustomCommandLabelN= - -# Custom command label that will appear as stock label on radio buttons/list -# items. The underscore indicates the mnemonic used with this item. Examples: -# Restart into _Windoze -# Perform system _Update -#CustomCommandLRLabelN= - -# Custom command tooltip. Examples -# Restarts the computer into Windoze -# Updates the computer software to the most recent version(s) -#CustomCommandTooltipN= - -# Custom command persistence option. Setting it to true will allow this -# command to appear outside the login manager, e.g. on the desktop through -# Log Out/Shut Down dialogs. The default value is false. -#CustomCommandIsPersistentN= - -# Custom command gdm/system restart option. Setting it to true will not -# restart gdm after command execution. The default commands (reboot, shut -# down) all reboot the system by default which is why the default setting -# is true. -# In addition when corresponding CustomCommandIsPersistentN option is set to -# true, setting CustomCommandNoRestartN to false will place CustomCommandN -# in the Shut Down dialog set of actions, setting it to true will place -# CustomCommandN in the Log Out dialog set of actions. -#CustomCommandNoRestartN= -# -# Example layout for more than one command: -#CustomCommand0= -#CustomCommandText0= -#CustomCommandLabel0= -#CustomCommandLRLabel0= -#CustomCommandTooltip0= -#CustomCommandIsPersistent0= -#CustomCommandNoRestart0= -# -#CustomCommand1= -#CustomCommandText1= -#CustomCommandLabel1= -#CustomCommandLRLabel1= -#CustomCommandTooltip1= -#CustomCommandIsPersistent1= -#CustomCommandNoRestart1= -# -# and so on -- cgit v1.2.3-54-g00ecf