initial commitHEADmaster

4 files changed, 42 insertions, 0 deletions

diff --git a/led-light-sensor/lib/.holder b/led-light-sensor/lib/.holder
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/led-light-sensor/lib/.holder
diff --git a/led-light-sensor/src/sketch.cpp b/led-light-sensor/src/sketch.cpp
new file mode 100644
index 0000000..f92065f
--- /dev/null
+++ b/led-light-sensor/src/sketch.cpp
@@ -0,0 +1,27 @@
+#include <Arduino.h>
+
+/*
+  Blink
+  Turns on an LED on for one second, then off for one second, repeatedly.
+ 
+  This example code is in the public domain.
+ */
+ 
+// Pin 13 has an LED connected on most Arduino boards.
+// give it a name:
+int led = 13;
+
+// the setup routine runs once when you press reset:
+void setup() {                
+  // initialize the digital pin as an output.
+  pinMode(led, OUTPUT);    
+}
+
+// the loop routine runs over and over again forever:
+void loop() {
+	int sensorValue = analogRead(A0); // Lit la valeur sur le pin A0
+	digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
+	delayMicroseconds(exp(sensorValue/100)*2); // Laisse la LED allumée quelques 10ièmes de millisecondes
+	digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
+	delay(5);               // Éteint la LED pour 5 millisecondes
+}
\ No newline at end of file
diff --git a/robofactor-theremin/lib/.holder b/robofactor-theremin/lib/.holder
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/robofactor-theremin/lib/.holder
diff --git a/robofactor-theremin/src/sketch.cpp b/robofactor-theremin/src/sketch.cpp
new file mode 100644
index 0000000..f6c5847
--- /dev/null
+++ b/robofactor-theremin/src/sketch.cpp
@@ -0,0 +1,15 @@
+#include <Arduino.h>
+
+// the setup routine runs once when you press reset:
+void setup() {
+	Serial.begin(9600); // Initialise le port série à 9600 bauds
+}
+
+// the loop routine runs over and over again forever:
+void loop() {
+	int sensorValue = analogRead(A0); // Lit la valeur sur le pin A0
+	Serial.print("["); // Envoie le caractère de début
+	Serial.print(sensorValue); // Envoie la valeur lue
+	Serial.println("]"); // Envoie le caractère de fin
+	delay(20); // Attend 20 millisecondes
+}
\ No newline at end of file