Merge remote branch 'nutyx-2009/master'

1 files changed, 0 insertions, 158 deletions

diff --git a/extra/numptyphysics/svn_config/servers b/extra/numptyphysics/svn_config/servers
deleted file mode 100755
index c87999b01..000000000
--- a/extra/numptyphysics/svn_config/servers
+++ /dev/null
@@ -1,158 +0,0 @@
-### This file specifies server-specific parameters,
-### including HTTP proxy information, HTTP timeout settings,
-### and authentication settings.
-###
-### The currently defined server options are:
-###   http-proxy-host            Proxy host for HTTP connection
-###   http-proxy-port            Port number of proxy host service
-###   http-proxy-username        Username for auth to proxy service
-###   http-proxy-password        Password for auth to proxy service
-###   http-proxy-exceptions      List of sites that do not use proxy
-###   http-timeout               Timeout for HTTP requests in seconds
-###   http-compression           Whether to compress HTTP requests
-###   neon-debug-mask            Debug mask for Neon HTTP library
-###   http-auth-types            Auth types to use for HTTP library
-###   ssl-authority-files        List of files, each of a trusted CA
-###   ssl-trust-default-ca       Trust the system 'default' CAs
-###   ssl-client-cert-file       PKCS#12 format client certificate file
-###   ssl-client-cert-password   Client Key password, if needed.
-###   ssl-pkcs11-provider        Name of PKCS#11 provider to use.
-###   http-library               Which library to use for http/https
-###                              connections (neon or serf)
-###   store-passwords            Specifies whether passwords used
-###                              to authenticate against a
-###                              Subversion server may be cached
-###                              to disk in any way.
-###   store-plaintext-passwords  Specifies whether passwords may
-###                              be cached on disk unencrypted.
-###   store-ssl-client-cert-pp   Specifies whether passphrase used
-###                              to authenticate against a client
-###                              certificate may be cached to disk
-###                              in any way
-###   store-ssl-client-cert-pp-plaintext
-###                              Specifies whether client cert
-###                              passphrases may be cached on disk
-###                              unencrypted (i.e., as plaintext).
-###   store-auth-creds           Specifies whether any auth info
-###                              (passwords as well as server certs)
-###                              may be cached to disk.
-###   username                   Specifies the default username.
-###
-### Set store-passwords to 'no' to avoid storing passwords in the
-### auth/ area of your config directory.  It defaults to 'yes',
-### but Subversion will never save your password to disk in
-### plaintext unless you tell it to.
-### Note that this option only prevents saving of *new* passwords;
-### it doesn't invalidate existing passwords.  (To do that, remove
-### the cache files by hand as described in the Subversion book.)
-###
-### Set store-plaintext-passwords to 'no' to avoid storing
-### passwords in unencrypted form in the auth/ area of your config
-### directory. Set it to 'yes' to allow Subversion to store
-### unencrypted passwords in the auth/ area.  The default is
-### 'ask', which means that Subversion will ask you before
-### saving a password to disk in unencrypted form.  Note that
-### this option has no effect if either 'store-passwords' or 
-### 'store-auth-creds' is set to 'no'.
-###
-### Set store-ssl-client-cert-pp to 'no' to avoid storing ssl
-### client certificate passphrases in the auth/ area of your
-### config directory.  It defaults to 'yes', but Subversion will
-### never save your passphrase to disk in plaintext unless you tell
-### it to via 'store-ssl-client-cert-pp-plaintext' (see below).
-###
-### Note store-ssl-client-cert-pp only prevents the saving of *new*
-### passphrases; it doesn't invalidate existing passphrases.  To do
-### that, remove the cache files by hand as described in the
-### Subversion book at http://svnbook.red-bean.com/nightly/en/\
-###                    svn.serverconfig.netmodel.html\
-###                    #svn.serverconfig.netmodel.credcache
-###
-### Set store-ssl-client-cert-pp-plaintext to 'no' to avoid storing
-### passphrases in unencrypted form in the auth/ area of your
-### config directory.  Set it to 'yes' to allow Subversion to
-### store unencrypted passphrases in the auth/ area.  The default
-### is 'ask', which means that Subversion will prompt before
-### saving a passphrase to disk in unencrypted form.  Note that
-### this option has no effect if either 'store-auth-creds' or 
-### 'store-ssl-client-cert-pp' is set to 'no'.
-###
-### Set store-auth-creds to 'no' to avoid storing any Subversion
-### credentials in the auth/ area of your config directory.
-### Note that this includes SSL server certificates.
-### It defaults to 'yes'.  Note that this option only prevents
-### saving of *new* credentials;  it doesn't invalidate existing
-### caches.  (To do that, remove the cache files by hand.)
-###
-### HTTP timeouts, if given, are specified in seconds.  A timeout
-### of 0, i.e. zero, causes a builtin default to be used.
-###
-### The commented-out examples below are intended only to
-### demonstrate how to use this file; any resemblance to actual
-### servers, living or dead, is entirely coincidental.
-
-### In the 'groups' section, the URL of the repository you're
-### trying to access is matched against the patterns on the right.
-### If a match is found, the server options are taken from the
-### section with the corresponding name on the left.
-
-[groups]
-# group1 = *.collab.net
-# othergroup = repository.blarggitywhoomph.com
-# thirdgroup = *.example.com
-
-### Information for the first group:
-# [group1]
-# http-proxy-host = proxy1.some-domain-name.com
-# http-proxy-port = 80
-# http-proxy-username = blah
-# http-proxy-password = doubleblah
-# http-timeout = 60
-# http-auth-types = basic;digest;negotiate
-# neon-debug-mask = 130
-# store-plaintext-passwords = no
-# username = harry
-
-### Information for the second group:
-# [othergroup]
-# http-proxy-host = proxy2.some-domain-name.com
-# http-proxy-port = 9000
-# No username and password for the proxy, so use the defaults below.
-
-### You can set default parameters in the 'global' section.
-### These parameters apply if no corresponding parameter is set in
-### a specifically matched group as shown above.  Thus, if you go
-### through the same proxy server to reach every site on the
-### Internet, you probably just want to put that server's
-### information in the 'global' section and not bother with
-### 'groups' or any other sections.
-###
-### Most people might want to configure password caching
-### parameters here, but you can also configure them per server
-### group (per-group settings override global settings).
-###
-### If you go through a proxy for all but a few sites, you can
-### list those exceptions under 'http-proxy-exceptions'.  This only
-### overrides defaults, not explicitly matched server names.
-###
-### 'ssl-authority-files' is a semicolon-delimited list of files,
-### each pointing to a PEM-encoded Certificate Authority (CA) 
-### SSL certificate.  See details above for overriding security 
-### due to SSL.
-[global]
-# http-proxy-exceptions = *.exception.com, www.internal-site.org
-# http-proxy-host = defaultproxy.whatever.com
-# http-proxy-port = 7000
-# http-proxy-username = defaultusername
-# http-proxy-password = defaultpassword
-# http-compression = no
-# http-auth-types = basic;digest;negotiate
-# No http-timeout, so just use the builtin default.
-# No neon-debug-mask, so neon debugging is disabled.
-# ssl-authority-files = /path/to/CAcert.pem;/path/to/CAcert2.pem
-#
-# Password / passphrase caching parameters:
-# store-passwords = no
-# store-plaintext-passwords = no
-# store-ssl-client-cert-pp = no
-# store-ssl-client-cert-pp-plaintext = no