numptyphysics, déplacé dans test

4 files changed, 435 insertions, 0 deletions

diff --git a/test/numptyphysics/svn_config/README.txt b/test/numptyphysics/svn_config/README.txt
new file mode 100755
index 000000000..7b78e5ecf
--- /dev/null
+++ b/test/numptyphysics/svn_config/README.txt
@@ -0,0 +1,124 @@
+This directory holds run-time configuration information for Subversion
+clients.  The configuration files all share the same syntax, but you
+should examine a particular file to learn what configuration
+directives are valid for that file.
+
+The syntax is standard INI format:
+
+   - Empty lines, and lines starting with '#', are ignored.
+     The first significant line in a file must be a section header.
+
+   - A section starts with a section header, which must start in
+     the first column:
+
+       [section-name]
+
+   - An option, which must always appear within a section, is a pair
+     (name, value).  There are two valid forms for defining an
+     option, both of which must start in the first column:
+
+       name: value
+       name = value
+
+     Whitespace around the separator (:, =) is optional.
+
+   - Section and option names are case-insensitive, but case is
+     preserved.
+
+   - An option's value may be broken into several lines.  The value
+     continuation lines must start with at least one whitespace.
+     Trailing whitespace in the previous line, the newline character
+     and the leading whitespace in the continuation line is compressed
+     into a single space character.
+
+   - All leading and trailing whitespace around a value is trimmed,
+     but the whitespace within a value is preserved, with the
+     exception of whitespace around line continuations, as
+     described above.
+
+   - When a value is a boolean, any of the following strings are
+     recognised as truth values (case does not matter):
+
+       true      false
+       yes       no
+       on        off
+       1         0
+
+   - When a value is a list, it is comma-separated.  Again, the
+     whitespace around each element of the list is trimmed.
+
+   - Option values may be expanded within a value by enclosing the
+     option name in parentheses, preceded by a percent sign and
+     followed by an 's':
+
+       %(name)s
+
+     The expansion is performed recursively and on demand, during
+     svn_option_get.  The name is first searched for in the same
+     section, then in the special [DEFAULT] section. If the name
+     is not found, the whole '%(name)s' placeholder is left
+     unchanged.
+
+     Any modifications to the configuration data invalidate all
+     previously expanded values, so that the next svn_option_get
+     will take the modifications into account.
+
+The syntax of the configuration files is a subset of the one used by
+Python's ConfigParser module; see
+
+   http://www.python.org/doc/current/lib/module-ConfigParser.html
+
+Configuration data in the Windows registry
+==========================================
+
+On Windows, configuration data may also be stored in the registry. The
+functions svn_config_read and svn_config_merge will read from the
+registry when passed file names of the form:
+
+   REGISTRY:<hive>/path/to/config-key
+
+The REGISTRY: prefix must be in upper case. The <hive> part must be
+one of:
+
+   HKLM for HKEY_LOCAL_MACHINE
+   HKCU for HKEY_CURRENT_USER
+
+The values in config-key represent the options in the [DEFAULT] section.
+The keys below config-key represent other sections, and their values
+represent the options. Only values of type REG_SZ whose name doesn't
+start with a '#' will be used; other values, as well as the keys'
+default values, will be ignored.
+
+
+File locations
+==============
+
+Typically, Subversion uses two config directories, one for site-wide
+configuration,
+
+  Unix:
+    /etc/subversion/servers
+    /etc/subversion/config
+    /etc/subversion/hairstyles
+  Windows:
+    %ALLUSERSPROFILE%\Application Data\Subversion\servers
+    %ALLUSERSPROFILE%\Application Data\Subversion\config
+    %ALLUSERSPROFILE%\Application Data\Subversion\hairstyles
+    REGISTRY:HKLM\Software\Tigris.org\Subversion\Servers
+    REGISTRY:HKLM\Software\Tigris.org\Subversion\Config
+    REGISTRY:HKLM\Software\Tigris.org\Subversion\Hairstyles
+
+and one for per-user configuration:
+
+  Unix:
+    ~/.subversion/servers
+    ~/.subversion/config
+    ~/.subversion/hairstyles
+  Windows:
+    %APPDATA%\Subversion\servers
+    %APPDATA%\Subversion\config
+    %APPDATA%\Subversion\hairstyles
+    REGISTRY:HKCU\Software\Tigris.org\Subversion\Servers
+    REGISTRY:HKCU\Software\Tigris.org\Subversion\Config
+    REGISTRY:HKCU\Software\Tigris.org\Subversion\Hairstyles
+
diff --git a/test/numptyphysics/svn_config/auth/svn.ssl.server/59ffbb8064591299582e5251f3a8e4db b/test/numptyphysics/svn_config/auth/svn.ssl.server/59ffbb8064591299582e5251f3a8e4db
new file mode 100755
index 000000000..4f3b77b2a
--- /dev/null
+++ b/test/numptyphysics/svn_config/auth/svn.ssl.server/59ffbb8064591299582e5251f3a8e4db
@@ -0,0 +1,13 @@
+K 10
+ascii_cert
+V 1400
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
+K 8
+failures
+V 1
+8
+K 15
+svn:realmstring
+V 28
+https://garage.maemo.org:443
+END
diff --git a/test/numptyphysics/svn_config/config b/test/numptyphysics/svn_config/config
new file mode 100755
index 000000000..0523c4426
--- /dev/null
+++ b/test/numptyphysics/svn_config/config
@@ -0,0 +1,140 @@
+### This file configures various client-side behaviors.
+###
+### The commented-out examples below are intended to demonstrate
+### how to use this file.
+
+### Section for authentication and authorization customizations.
+[auth]
+### Set password stores used by Subversion. They should be
+### delimited by spaces or commas. The order of values determines
+### the order in which password stores are used.
+### Valid password stores:
+###   gnome-keyring        (Unix-like systems)
+###   kwallet              (Unix-like systems)
+###   keychain             (Mac OS X)
+###   windows-cryptoapi    (Windows)
+# password-stores = gnome-keyring,kwallet
+###
+### The rest of this section in this file has been deprecated.
+### Both 'store-passwords' and 'store-auth-creds' can now be
+### specified in the 'servers' file in your config directory.
+### Anything specified in this section is overridden by settings
+### specified in the 'servers' file.
+###
+### Set store-passwords to 'no' to avoid storing passwords in the
+### auth/ area of your config directory.  It defaults to 'yes',
+### but Subversion will never save your password to disk in
+### plaintext unless you tell it to (see the 'servers' file).
+### Note that this option only prevents saving of *new* passwords;
+### it doesn't invalidate existing passwords.  (To do that, remove
+### the cache files by hand as described in the Subversion book.)
+# store-passwords = no
+### Set store-auth-creds to 'no' to avoid storing any subversion
+### credentials in the auth/ area of your config directory.
+### It defaults to 'yes'.  Note that this option only prevents
+### saving of *new* credentials;  it doesn't invalidate existing
+### caches.  (To do that, remove the cache files by hand.)
+# store-auth-creds = no
+
+### Section for configuring external helper applications.
+[helpers]
+### Set editor-cmd to the command used to invoke your text editor.
+###   This will override the environment variables that Subversion
+###   examines by default to find this information ($EDITOR, 
+###   et al).
+# editor-cmd = editor (vi, emacs, notepad, etc.)
+### Set diff-cmd to the absolute path of your 'diff' program.
+###   This will override the compile-time default, which is to use
+###   Subversion's internal diff implementation.
+# diff-cmd = diff_program (diff, gdiff, etc.)
+### Set diff3-cmd to the absolute path of your 'diff3' program.
+###   This will override the compile-time default, which is to use
+###   Subversion's internal diff3 implementation.
+# diff3-cmd = diff3_program (diff3, gdiff3, etc.)
+### Set diff3-has-program-arg to 'yes' if your 'diff3' program
+###   accepts the '--diff-program' option.
+# diff3-has-program-arg = [yes | no]
+### Set merge-tool-cmd to the command used to invoke your external
+### merging tool of choice. Subversion will pass 4 arguments to
+### the specified command: base theirs mine merged
+# merge-tool-cmd = merge_command
+
+### Section for configuring tunnel agents.
+[tunnels]
+### Configure svn protocol tunnel schemes here.  By default, only
+### the 'ssh' scheme is defined.  You can define other schemes to
+### be used with 'svn+scheme://hostname/path' URLs.  A scheme
+### definition is simply a command, optionally prefixed by an
+### environment variable name which can override the command if it
+### is defined.  The command (or environment variable) may contain
+### arguments, using standard shell quoting for arguments with
+### spaces.  The command will be invoked as:
+###   <command> <hostname> svnserve -t
+### (If the URL includes a username, then the hostname will be
+### passed to the tunnel agent as <user>@<hostname>.)  If the
+### built-in ssh scheme were not predefined, it could be defined
+### as:
+# ssh = $SVN_SSH ssh
+### If you wanted to define a new 'rsh' scheme, to be used with
+### 'svn+rsh:' URLs, you could do so as follows:
+# rsh = rsh
+### Or, if you wanted to specify a full path and arguments:
+# rsh = /path/to/rsh -l myusername
+### On Windows, if you are specifying a full path to a command,
+### use a forward slash (/) or a paired backslash (\\) as the
+### path separator.  A single backslash will be treated as an
+### escape for the following character.
+
+### Section for configuring miscelleneous Subversion options.
+[miscellany]
+### Set global-ignores to a set of whitespace-delimited globs
+### which Subversion will ignore in its 'status' output, and
+### while importing or adding files and directories.
+### '*' matches leading dots, e.g. '*.rej' matches '.foo.rej'.
+# global-ignores = *.o *.lo *.la *.al .libs *.so *.so.[0-9]* *.a *.pyc *.pyo
+#   *.rej *~ #*# .#* .*.swp .DS_Store
+### Set log-encoding to the default encoding for log messages
+# log-encoding = latin1
+### Set use-commit-times to make checkout/update/switch/revert
+### put last-committed timestamps on every file touched.
+# use-commit-times = yes
+### Set no-unlock to prevent 'svn commit' from automatically
+### releasing locks on files.
+# no-unlock = yes
+### Set mime-types-file to a MIME type registry file, used to
+### provide hints to Subversion's MIME type auto-detection
+### algorithm.
+# mime-types-file = /path/to/mime.types
+### Set preserved-conflict-file-exts to a whitespace-delimited
+### list of patterns matching file extensions which should be
+### preserved in generated conflict file names.  By default,
+### conflict files use custom extensions.
+# preserved-conflict-file-exts = doc ppt xls od?
+### Set enable-auto-props to 'yes' to enable automatic properties
+### for 'svn add' and 'svn import', it defaults to 'no'.
+### Automatic properties are defined in the section 'auto-props'.
+# enable-auto-props = yes
+### Set interactive-conflicts to 'no' to disable interactive
+### conflict resolution prompting.  It defaults to 'yes'.
+# interactive-conflicts = no
+
+### Section for configuring automatic properties.
+[auto-props]
+### The format of the entries is:
+###   file-name-pattern = propname[=value][;propname[=value]...]
+### The file-name-pattern can contain wildcards (such as '*' and
+### '?').  All entries which match (case-insensitively) will be
+### applied to the file.  Note that auto-props functionality
+### must be enabled, which is typically done by setting the
+### 'enable-auto-props' option.
+# *.c = svn:eol-style=native
+# *.cpp = svn:eol-style=native
+# *.h = svn:eol-style=native
+# *.dsp = svn:eol-style=CRLF
+# *.dsw = svn:eol-style=CRLF
+# *.sh = svn:eol-style=native;svn:executable
+# *.txt = svn:eol-style=native
+# *.png = svn:mime-type=image/png
+# *.jpg = svn:mime-type=image/jpeg
+# Makefile = svn:eol-style=native
+
diff --git a/test/numptyphysics/svn_config/servers b/test/numptyphysics/svn_config/servers
new file mode 100755
index 000000000..c87999b01
--- /dev/null
+++ b/test/numptyphysics/svn_config/servers
@@ -0,0 +1,158 @@
+### This file specifies server-specific parameters,
+### including HTTP proxy information, HTTP timeout settings,
+### and authentication settings.
+###
+### The currently defined server options are:
+###   http-proxy-host            Proxy host for HTTP connection
+###   http-proxy-port            Port number of proxy host service
+###   http-proxy-username        Username for auth to proxy service
+###   http-proxy-password        Password for auth to proxy service
+###   http-proxy-exceptions      List of sites that do not use proxy
+###   http-timeout               Timeout for HTTP requests in seconds
+###   http-compression           Whether to compress HTTP requests
+###   neon-debug-mask            Debug mask for Neon HTTP library
+###   http-auth-types            Auth types to use for HTTP library
+###   ssl-authority-files        List of files, each of a trusted CA
+###   ssl-trust-default-ca       Trust the system 'default' CAs
+###   ssl-client-cert-file       PKCS#12 format client certificate file
+###   ssl-client-cert-password   Client Key password, if needed.
+###   ssl-pkcs11-provider        Name of PKCS#11 provider to use.
+###   http-library               Which library to use for http/https
+###                              connections (neon or serf)
+###   store-passwords            Specifies whether passwords used
+###                              to authenticate against a
+###                              Subversion server may be cached
+###                              to disk in any way.
+###   store-plaintext-passwords  Specifies whether passwords may
+###                              be cached on disk unencrypted.
+###   store-ssl-client-cert-pp   Specifies whether passphrase used
+###                              to authenticate against a client
+###                              certificate may be cached to disk
+###                              in any way
+###   store-ssl-client-cert-pp-plaintext
+###                              Specifies whether client cert
+###                              passphrases may be cached on disk
+###                              unencrypted (i.e., as plaintext).
+###   store-auth-creds           Specifies whether any auth info
+###                              (passwords as well as server certs)
+###                              may be cached to disk.
+###   username                   Specifies the default username.
+###
+### Set store-passwords to 'no' to avoid storing passwords in the
+### auth/ area of your config directory.  It defaults to 'yes',
+### but Subversion will never save your password to disk in
+### plaintext unless you tell it to.
+### Note that this option only prevents saving of *new* passwords;
+### it doesn't invalidate existing passwords.  (To do that, remove
+### the cache files by hand as described in the Subversion book.)
+###
+### Set store-plaintext-passwords to 'no' to avoid storing
+### passwords in unencrypted form in the auth/ area of your config
+### directory. Set it to 'yes' to allow Subversion to store
+### unencrypted passwords in the auth/ area.  The default is
+### 'ask', which means that Subversion will ask you before
+### saving a password to disk in unencrypted form.  Note that
+### this option has no effect if either 'store-passwords' or 
+### 'store-auth-creds' is set to 'no'.
+###
+### Set store-ssl-client-cert-pp to 'no' to avoid storing ssl
+### client certificate passphrases in the auth/ area of your
+### config directory.  It defaults to 'yes', but Subversion will
+### never save your passphrase to disk in plaintext unless you tell
+### it to via 'store-ssl-client-cert-pp-plaintext' (see below).
+###
+### Note store-ssl-client-cert-pp only prevents the saving of *new*
+### passphrases; it doesn't invalidate existing passphrases.  To do
+### that, remove the cache files by hand as described in the
+### Subversion book at http://svnbook.red-bean.com/nightly/en/\
+###                    svn.serverconfig.netmodel.html\
+###                    #svn.serverconfig.netmodel.credcache
+###
+### Set store-ssl-client-cert-pp-plaintext to 'no' to avoid storing
+### passphrases in unencrypted form in the auth/ area of your
+### config directory.  Set it to 'yes' to allow Subversion to
+### store unencrypted passphrases in the auth/ area.  The default
+### is 'ask', which means that Subversion will prompt before
+### saving a passphrase to disk in unencrypted form.  Note that
+### this option has no effect if either 'store-auth-creds' or 
+### 'store-ssl-client-cert-pp' is set to 'no'.
+###
+### Set store-auth-creds to 'no' to avoid storing any Subversion
+### credentials in the auth/ area of your config directory.
+### Note that this includes SSL server certificates.
+### It defaults to 'yes'.  Note that this option only prevents
+### saving of *new* credentials;  it doesn't invalidate existing
+### caches.  (To do that, remove the cache files by hand.)
+###
+### HTTP timeouts, if given, are specified in seconds.  A timeout
+### of 0, i.e. zero, causes a builtin default to be used.
+###
+### The commented-out examples below are intended only to
+### demonstrate how to use this file; any resemblance to actual
+### servers, living or dead, is entirely coincidental.
+
+### In the 'groups' section, the URL of the repository you're
+### trying to access is matched against the patterns on the right.
+### If a match is found, the server options are taken from the
+### section with the corresponding name on the left.
+
+[groups]
+# group1 = *.collab.net
+# othergroup = repository.blarggitywhoomph.com
+# thirdgroup = *.example.com
+
+### Information for the first group:
+# [group1]
+# http-proxy-host = proxy1.some-domain-name.com
+# http-proxy-port = 80
+# http-proxy-username = blah
+# http-proxy-password = doubleblah
+# http-timeout = 60
+# http-auth-types = basic;digest;negotiate
+# neon-debug-mask = 130
+# store-plaintext-passwords = no
+# username = harry
+
+### Information for the second group:
+# [othergroup]
+# http-proxy-host = proxy2.some-domain-name.com
+# http-proxy-port = 9000
+# No username and password for the proxy, so use the defaults below.
+
+### You can set default parameters in the 'global' section.
+### These parameters apply if no corresponding parameter is set in
+### a specifically matched group as shown above.  Thus, if you go
+### through the same proxy server to reach every site on the
+### Internet, you probably just want to put that server's
+### information in the 'global' section and not bother with
+### 'groups' or any other sections.
+###
+### Most people might want to configure password caching
+### parameters here, but you can also configure them per server
+### group (per-group settings override global settings).
+###
+### If you go through a proxy for all but a few sites, you can
+### list those exceptions under 'http-proxy-exceptions'.  This only
+### overrides defaults, not explicitly matched server names.
+###
+### 'ssl-authority-files' is a semicolon-delimited list of files,
+### each pointing to a PEM-encoded Certificate Authority (CA) 
+### SSL certificate.  See details above for overriding security 
+### due to SSL.
+[global]
+# http-proxy-exceptions = *.exception.com, www.internal-site.org
+# http-proxy-host = defaultproxy.whatever.com
+# http-proxy-port = 7000
+# http-proxy-username = defaultusername
+# http-proxy-password = defaultpassword
+# http-compression = no
+# http-auth-types = basic;digest;negotiate
+# No http-timeout, so just use the builtin default.
+# No neon-debug-mask, so neon debugging is disabled.
+# ssl-authority-files = /path/to/CAcert.pem;/path/to/CAcert2.pem
+#
+# Password / passphrase caching parameters:
+# store-passwords = no
+# store-plaintext-passwords = no
+# store-ssl-client-cert-pp = no
+# store-ssl-client-cert-pp-plaintext = no